
Rotating faucet extender
Aim the water exactly where you need it
Flowvera threads onto the tip of your existing faucet so you can rotate and angle the stream across the whole sink — corners, tall pots, and produce.
The problem
Many fixed faucet outlets direct water straight down
Rinsing the far side of the basin, filling a tall pot, or washing produce can mean awkward angles and splash. The stream tends to go where the faucet points — not where you need it.
- Hard to reach the corners of the sink
- Tall pots don’t fit under a fixed stream
- Splash-back off dishes and hands

Why Flowvera
Built to make everyday rinsing easier
Directional water flow
Rotate and angle the head to send water where you need it.
Multiple flow modes
Switch between the available water-flow settings for the task.
Reach sink corners
Direct the stream to the far corners, pots, and pans.
Kitchen & bathroom
Use it where a standard removable aerator fits.
Simple to fit
Designed to hand-tighten onto compatible removable aerators.
See it in motion
Rotate, angle, and switch flow modes
Watch the head swivel across the basin and switch between the available flow modes.
Installation
Install in a few simple steps
Designed to hand-tighten onto compatible faucets with a removable aerator. Some setups may require an adapter, washer, or plumber’s tape.
Turn off the water
Unscrew your existing aerator from the faucet tip.
Check your thread
Note whether your faucet is male- or female-threaded.
Add an adapter if needed
Fit a compatible adapter or washer if the threads differ.
Attach Flowvera
Hand-tighten onto the threads — don’t over-tighten.
Test for leaks
Run water and check the seal; reseat the gasket if needed.
Select your flow mode
Rotate the head and pick your water-flow setting.
Compatibility
Will it fit your faucet?
Compatibility depends on your faucet type and thread size. Check the Compatibility Guide before ordering. Pull-out faucets, non-removable aerators, unusual outlets, or uncommon thread sizes may not be compatible or may require another adapter.

Honest comparison
Standard faucet vs. Flowvera
Differences depend on your faucet and setup. We don’t claim verified water savings or universal compatibility.
Bundles
Choose your Flowvera bundle
The same Flowvera, in the pack size that fits your home. Every option opens the product page to pick your finish and pack.
Single Sink
$39.99
Choose Single SinkOne Flowvera for your main sink.
- Most Popular
Home Bundle
$59.99
Save $19.99 vs. two singles
Choose Home BundleTwo units — one for the kitchen, one for the bath.
Whole-Home Bundle
$79.99
Save $39.98 vs. three singles
Choose Whole-Home BundleThree units to cover the whole home.
Specifications
Product specifications
Supplier-provided specifications. Confirm details against your own setup before installing.
Materials & finish
ABS with an electroplated finish. Available in matte Black and polished Silver.
Pack options
Single Sink (1), Home Bundle (2), or Whole-Home Bundle (3).
Supplier-listed ratings
Supplier-listed maximum operating temperature 70°C / 158°F and nominal pressure 0.6 MPa. These figures are provided by the supplier and not independently verified.
In the box
Your chosen number of Flowvera units, each with a pre-fitted gasket/washer. Adapters are not included and may be required for some faucets.
Care
Hand-tighten only and check the connection periodically. Rinse the aerator screen to clear debris; soak in a 1:1 white-vinegar solution for mineral buildup. Avoid abrasive pads and harsh chemicals. Stop use if cracked or leaking.
Shipping & returns
Ordering with confidence
Free US shipping
Free US standard shipping on every order.
Order updates available
Tracking availability and carrier updates vary by shipping method and destination.
Clear return policy
See our return policy for details. Refund Policy.
FAQ
Frequently asked questions
Will it fit my faucet?
Flowvera is designed for most standard kitchen and bathroom faucets with a removable aerator. Pull-out sprayers, touchless faucets, non-removable outlets, and uncommon thread sizes may not fit or may need an adapter. Check the Compatibility Guide first.
How do I install it?
Unscrew your existing aerator, hand-tighten Flowvera in its place, and test for leaks. Some setups may need an adapter, washer, or plumber’s tape. See the Installation Guide.
Does it have different flow modes?
Yes — you can switch between the available water-flow settings. The built-in aerator blends air into the stream.
What is it made of?
ABS with an electroplated finish, available in Black and Silver.
How do I clean it?
Rinse the aerator screen to clear debris and soak it in a 1:1 white-vinegar solution for mineral buildup. Avoid abrasive pads and harsh chemicals.
How is it shipped?
Free US standard shipping. Tracking availability and carrier updates vary by shipping method and destination.
What is your return policy?
See our Refund Policy for current return details.