Flowvera Rotating Faucet Extender
Flowvera Rotating Faucet Extender
Rotating faucet extender — angle the stream across your whole sink.
Bundles: 1PC = Single Sink · 2PCS = Home Bundle · 3PCS = Whole-Home Bundle. Choose your finish and pack below.
Available payment methods depend on your device, location, and checkout eligibility.
✓ Free US standard shipping. Clear return policy.
Check compatibility before ordering
Compatibility depends on your faucet type and thread size. Pull-out faucets, non-removable aerators, unusual outlets, or uncommon thread sizes may not be compatible or may require another adapter.
Give your sink its full range of motion.
The Flowvera Rotating Faucet Extender attaches to the tip of your existing faucet and gives the stream a rotating, extended reach — so water goes where you need it instead of straight down the drain. Angle it to rinse the far corner of the basin, swing it over a tall pot, or aim it to wash produce and hands without leaning in. When you're done, it returns to center.
The head swivels on a smooth joint, and an aerator softens the flow into a fuller, gentler stream that helps cut down the splash a bare faucet kicks back at you. Installation is tool-free on most standard faucets: unscrew your current aerator, hand-tighten Flowvera in its place, and you're set in a minute or two.
It comes in two finishes — matte Black and polished Silver — to sit cleanly against your fixtures. Choose a single unit for your main sink, or a bundle to cover the kitchen and bath.
Key benefits
- Reach the whole sink — the rotating head directs the stream to any corner, pot, or pan.
- Less splash, softer stream — the built-in aerator blends air into the flow for a gentler feel.
- Multiple flow modes — switch between the available water-flow settings depending on the task.
- Tool-free in about a minute — threads onto standard aerator fittings; no plumber for most faucets.
- Two finishes, made to match — matte Black or polished Silver.
How it works
Water enters where it threads onto your faucet; an aerator screen blends in air to soften and shape the stream; and the swivel joint lets you rotate and angle that stream across the sink, then return it to center.
Installation
- Turn the faucet off and unscrew your existing aerator from the tip.
- Check that the gasket/washer is seated inside Flowvera.
- Hand-tighten Flowvera onto the threads — do not over-tighten.
- Run water and check for drips; reseat the gasket or add plumber's tape if needed.
- Rotate the head to test the range of motion and select your flow mode.
Compatibility
Designed to fit most standard kitchen and bathroom faucets that have a removable aerator. Before ordering, check that your faucet's tip unscrews. Pull-down/pull-out sprayers, touchless faucets, non-removable or unusually shaped outlets, and uncommon thread sizes may not be compatible or may need an additional adapter. If you're unsure, send us a clear photo of your faucet tip via the Contact page before ordering. We don't claim to fit every faucet.
Product details
- Material: ABS with electroplated finish
- Finishes: Black, Silver
- Packages: 1, 2, or 3 pieces
- Supplier-listed maximum operating temperature: 70°C / 158°F
- Supplier-listed nominal pressure: 0.6 MPa
Care
- Hand-tighten only; check the connection periodically.
- Rinse the aerator screen to clear debris; soak in a 1:1 white-vinegar solution for mineral buildup.
- Avoid abrasive pads and harsh chemical cleaners.
- Stop use if cracked, damaged, or leaking.
Shipping & returns
Free US standard shipping, with tracking emailed on dispatch. 30-day returns on unused items in original packaging — see our Refund Policy.
Why Flowvera
Five reasons it earns its spot
Directional water flow
Rotate and angle the head to send water where you need it.
Multiple flow modes
Switch between the available water-flow settings.
Reach sink corners
Direct the stream to corners, pots, and pans.
Kitchen & bathroom
Works where a standard removable aerator fits.
Simple to fit
Designed to hand-tighten onto compatible removable aerators.
Installation
Install in a few simple steps
Designed to hand-tighten onto compatible faucets with a removable aerator. Some setups may require an adapter, washer, or plumber’s tape.
Turn off the water
Unscrew your existing aerator from the faucet tip.
Check your thread
Note whether your faucet is male- or female-threaded.
Add an adapter if needed
Fit a compatible adapter or washer if the threads differ.
Attach Flowvera
Hand-tighten onto the threads — don’t over-tighten.
Test for leaks
Run water and check the seal; reseat the gasket if needed.
Select your flow mode
Rotate the head and pick your water-flow setting.
Details
Specifications, contents & care
Supplier-provided specifications. Confirm details against your own setup before installing.
Materials & finish
ABS with an electroplated finish. Matte Black or polished Silver.
Package contents
Your chosen number of Flowvera units (1, 2, or 3), each with a pre-fitted gasket/washer. Adapters are not included and may be required for some faucets.
Supplier-listed ratings
Supplier-listed maximum operating temperature 70°C / 158°F and nominal pressure 0.6 MPa. Provided by the supplier and not independently verified.
Care
Hand-tighten only and check the connection periodically. Rinse the aerator screen; soak in a 1:1 white-vinegar solution for mineral buildup. Avoid abrasive pads and harsh chemicals. Stop use if cracked or leaking.
Shipping & returns
Ordering with confidence
Free US shipping
Free US standard shipping on every order.
Order updates available
Tracking availability and carrier updates vary by shipping method and destination.
Clear return policy
See our return policy for details. Refund Policy.
FAQ
Frequently asked questions
Will it fit my faucet?
Flowvera fits most standard faucets with a removable aerator. Pull-out sprayers, touchless faucets, non-removable outlets, and uncommon thread sizes may not fit or may need an adapter. Check the Compatibility Guide first.
How do I install it?
Unscrew your existing aerator, hand-tighten Flowvera in its place, and test for leaks. Some setups may need an adapter, washer, or plumber’s tape.
Does it have different flow modes?
Yes — switch between the available water-flow settings. The built-in aerator blends air into the stream.
What is it made of?
ABS with an electroplated finish, in Black or Silver.
How do I clean it?
Rinse the aerator screen and soak it in a 1:1 white-vinegar solution for mineral buildup. Avoid abrasive pads and harsh chemicals.
How is it shipped?
Free US standard shipping. Tracking availability and carrier updates vary by shipping method and destination.
What is your return policy?
See our Refund Policy for current return details.