How It Works

Flowvera is designed to hand-tighten onto compatible faucets with a removable aerator. Some setups may require an adapter, washer, or plumber's tape.

Install in a few simple steps

  1. Turn off the water. Unscrew your existing aerator from the faucet tip.
  2. Check your thread. Note whether your faucet is male- or female-threaded.
  3. Add an adapter if needed. Fit a compatible adapter or washer if the threads differ.
  4. Attach Flowvera. Hand-tighten onto the threads — don't over-tighten.
  5. Test for leaks. Run water and check the seal; reseat the gasket if needed.
  6. Select your flow mode. Rotate the head and pick your water-flow setting.

Before you order

Compatibility depends on your faucet type and thread size. Pull-out faucets, non-removable aerators, unusual outlets, or uncommon thread sizes may not be compatible or may require another adapter. See the Compatibility Guide and Installation Guide for details.